Name: Bambu Lab FAC119 Chamber Heater Unit (For 220V Printer)
Brand: Bambu Lab
SKU: FAC119

Question 1

Which Bambu Lab printers is the FAC119 Chamber Heater Unit compatible with?

Accepted Answer

The listing states this unit is designed for Bambu Lab printers using a 220V AC input. The exact list of compatible Bambu Lab model(s) and revision(s) is not specified in the available data, and 110V/120V printer variants should not be assumed compatible. Confirm exact model compatibility with Bizgram or Bambu Lab official documentation before ordering.

Question 2

What are the dimensions, weight and physical form factor of this part?

Accepted Answer

The published packaging figures are 160 × 120 × 80 mm and 0.35 kg. These are carton/packaging dimensions, not the physical dimensions of the heater unit itself. The unit's own dimensions, mounting footprint and connector orientation are not published in the available data and should be confirmed with Bizgram or the manufacturer.

Question 3

How is the chamber heater installed, and does it require calibration or firmware changes?

Accepted Answer

The listing describes it as a replacement module that is user-installable, but it does not document a specific installation procedure. Any required calibration, connector routing, thermal-paste/insulation steps or firmware recognition should be confirmed in Bambu Lab's official service documentation, and power should be fully disconnected before any replacement work.

Question 4

What warranty applies to the FAC119 Chamber Heater Unit?

Accepted Answer

No warranty duration or terms are stated in the available data. Warranty coverage is not something that can be assumed or invented — please confirm the applicable warranty period, coverage scope and claim process with Bizgram or Bambu Lab documentation at the time of purchase.

Question 5

What condition is this product supplied in (new, refurbished, OEM)?

Accepted Answer

The listing describes FAC119 as a genuine Bambu Lab replacement part with a Bambu Lab MPN/SKU. The specific condition offered (for example new retail, new bulk/OEM, or refurbished) is not stated in the available data and must be confirmed with Bizgram before ordering.

Question 6

What power input and cabling does it use?

Accepted Answer

The input voltage is stated as 220V AC. Power consumption (watts), current draw, connector type, cable length and harness details are not published in the available data. This unit must not be connected to a 110V/120V mains supply unless the manufacturer explicitly confirms support; verify all electrical details with Bizgram or Bambu Lab documentation.

Question 7

What heating performance or temperature range does the chamber heater provide?

Accepted Answer

The unit is described as providing controlled heating inside the printer chamber to help maintain stable print conditions for advanced filaments. No target chamber temperature range, warm-up time, heater output rating or tolerance figures are stated in the available data — confirm any performance specifications with Bizgram or the manufacturer.

Question 8

Does it require any software, driver, firmware or licence?

Accepted Answer

No software, driver or licence is mentioned as being required for this hardware part. Whether the printer's firmware requires any action, recognition or version prerequisite after fitting a replacement chamber heater is not documented in the available data and should be verified with Bambu Lab technical documentation.

Question 9

What is included in the box?

Accepted Answer

The available data does not list box contents beyond the heater unit itself, and no mounting hardware, cabling, connectors, documentation or thermal accessories are confirmed. Treat the package contents as unverified and confirm exactly what is supplied with Bizgram or the manufacturer before purchase.

Question 10

Where should it be deployed and what environment does it require?

Accepted Answer

As a printer-integrated part, it is intended for use inside the printer's chamber within an indoor, dry, adequately ventilated operating environment. No ambient temperature, humidity or altitude operating limits are published in the available data; confirm environmental and placement requirements with Bizgram or Bambu Lab documentation.

Specification	Details
SKU	FAC119
Compatibility	Bambu Lab Printers (220V models)
Type	Chamber Heater Unit
Function	Provides controlled heating inside the printer chamber
Input Voltage	220V AC
Material	Metal and heat-resistant components
Packaging Weight	0.35 kg
Packaging Size	160 × 120 × 80 mm

Bambu Lab FAC119 Chamber Heater Unit (For 220V Printer)

Product information

🛍️ Product Name

📦 Product Overview

🌟 Top Highlights

📐 Technical Details

💡 Why You Should Buy It

🎯 Recommended Use Cases

🤝 Customer Assurance

👉 Call to Action

Frequently asked questions

You may also need

Hp CB389A LJ 220V USER MAINTENANCE KIT HP Printer Accessory Kit

Hp PageWide Printhead Wiper Kit HP Printer Cleaning Wiper

Hp Color LJ Toner Collection Unit. HP Toner Collection Kit - Colour - Laser - 54000 Pages

Bambu Lab FAC109 Regular Idler Pulley - H2D,H2D Pro,H2S

Bambu Lab FAC117 Air Filter Cover - H2D Pro,H2S,H2D

Bambu Lab FAC120 Active Chamber Exhaust - H2D Pro,H2S,H2D

Bambu Lab FAC125 Flow Blocker - H2D,H2D Pro

Bambu Lab FAC148 Filament Cutter Stopper - H2S