Name: Bambu Lab FAC150 Heatbed Unit (For 220V Printer)
Brand: Bambu Lab
SKU: FAC150

Question 1

Which Bambu Lab printers is the FAC150 Heatbed Unit compatible with?

Accepted Answer

The product listing describes the FAC150 as a genuine replacement heatbed unit for Bambu Lab printers configured for 220V input. The listing does not name specific printer models, so exact model compatibility (including whether it fits your specific Bambu Lab machine and voltage configuration) should be confirmed with Bizgram or Bambu Lab documentation before ordering. Do not assume compatibility with 110V/120V printer variants.

Question 2

What are the physical dimensions and form factor of this heatbed?

Accepted Answer

The current listing states approximate dimensions of 256 mm × 256 mm × 5 mm and a weight of approximately 0.45 kg, described as an aluminium base with an integrated heating element. These figures come from the reseller listing rather than verified manufacturer data, so the exact build-plate footprint, thickness, mounting hole pattern and weight should be confirmed with Bizgram or Bambu Lab documentation for your specific printer model.

Question 3

How is the FAC150 heatbed installed, and is it a user-serviceable part?

Accepted Answer

The listing describes it as a replacement part with a simple installation process for maintenance. Heatbed replacement involves mains-voltage wiring and a heated build surface, so installation typically requires disconnecting power, removing the old bed assembly and reconnecting the heater and thermistor harnesses. Because the listing does not include a step-by-step procedure, follow the official Bambu Lab replacement guide for your printer model or have the swap performed by a qualified technician. Installation instructions should be confirmed with Bizgram or the manufacturer.

Question 4

What warranty applies to the FAC150 Heatbed Unit?

Accepted Answer

No warranty duration or terms are stated in the available product information, and warranty length must not be assumed. As a genuine replacement part supplied through a reseller, coverage depends on the manufacturer's policy for spare parts and on the reseller's own terms. Please confirm the applicable warranty period, whether it covers the heating element and thermistor, and the claims process directly with Bizgram or Bambu Lab.

Question 5

Is this a new, genuine Bambu Lab part or a refurbished/third-party item?

Accepted Answer

The listing presents the FAC150 as a genuine Bambu Lab replacement part with the model/FAC150 identifier and SKU FAC150. The available information does not state whether the unit is supplied as brand-new retail packaging or in another condition, and no condition guarantee beyond the listing wording can be inferred. Confirm the exact condition (new/genuine OEM vs. refurbished vs. compatible third-party) with Bizgram before purchase.

Question 6

What are the power requirements and cabling details for this heatbed?

Accepted Answer

The listing specifies 220V operation and states that the unit is designed for printers configured for 220V input. Details such as current draw, wattage, heater resistance, connector type, cable length and whether the thermistor or heater harness is pre-attached are not provided. These electrical and cabling specifications should be confirmed with Bizgram or Bambu Lab documentation, and installation should only be carried out with the printer fully disconnected from mains power.

Question 7

What heating performance can I expect, and does it have a maximum temperature rating?

Accepted Answer

The listing claims uniform heating across the build surface, stable temperature control and improved first-layer adhesion, with reduced warping. It does not state a maximum bed temperature, heat-up time, temperature accuracy or power output, and those figures cannot be invented or assumed. If you need a specific maximum bed temperature or thermal specification for high-temperature filaments, confirm it with Bizgram or Bambu Lab documentation.

Question 8

Does the FAC150 heatbed require any firmware, software or licence to operate?

Accepted Answer

The heatbed is a hardware component and the listing references no software, firmware licence, subscription or activation requirement. In practice, replacing a heatbed on a Bambu Lab printer may require a calibration or bed-levelling routine through the printer's firmware/companion software, and any model-specific firmware steps or temperature-limit checks should be confirmed against official Bambu Lab documentation for your printer. No licence or key is included or required per the listing.

Question 9

What is included in the box with the FAC150 Heatbed Unit?

Accepted Answer

The listing states the box contents as Heatbed Unit ×1. Items such as mounting screws, heater/thermistor cables, connectors, thermal pads or installation documentation are not listed, so do not assume they are included. Confirm the exact accessory and fastener contents with Bizgram before ordering, and retain any screws and harnesses from the original bed if they are required for the swap.

Question 10

What environment and handling conditions are suitable for storage and deployment of this heatbed?

Accepted Answer

This is an internal printer component rather than a device intended for standalone or outdoor use, and no specific operating temperature, humidity or ingress-protection rating is given in the listing. Handle the unit by its edges, avoid bending the heated plate and keep it dry and free of dust or debris before installation, since surface contamination can affect adhesion. For precise environmental or storage specifications, and for safe disposal or return of a failed unit, confirm with Bizgram or Bambu Lab documentation.

Specification	Details
Model	FAC150 Heatbed Unit
Compatibility	Printers configured for 220V input
Function	Provides heated build surface for improved adhesion
Material	Aluminum base with integrated heating element
Voltage	220V
Dimensions	Approx. 256 mm × 256 mm × 5 mm
Weight	0.45 kg
Included in Box	Heatbed Unit ×1
Version	Designed for 220V printer models

Bambu Lab FAC150 Heatbed Unit (For 220V Printer)

Product information

🛍️ Product Name

📦 Product Overview

🌟 Top Highlights

📐 Technical Details

💡 Why You Should Buy It

🎯 Recommended Use Cases

🤝 Customer Assurance

👉 Call to Action

Frequently asked questions

You may also need

Hp CB389A LJ 220V USER MAINTENANCE KIT HP Printer Accessory Kit

Hp PageWide Printhead Wiper Kit HP Printer Cleaning Wiper

Hp Color LJ Toner Collection Unit. HP Toner Collection Kit - Colour - Laser - 54000 Pages

Bambu Lab FAC109 Regular Idler Pulley - H2D,H2D Pro,H2S

Bambu Lab FAC117 Air Filter Cover - H2D Pro,H2S,H2D

Bambu Lab FAC119 Chamber Heater Unit (For 220V Printer)

Bambu Lab FAC120 Active Chamber Exhaust - H2D Pro,H2S,H2D

Bambu Lab FAC125 Flow Blocker - H2D,H2D Pro